Comfy humidity mode helps you automatically change your AC settings if room humidity goes above or falls below a pre-set value helping you save energy with lots of convenience. This being said there are a certain pre requisites that the user has to keep in mind to effectively use these humidity based triggers.
- In order for comfy humidity mode to trigger, your room humidity needs to exceed or fall short of the set humidity range by one percent which in turn will trigger your desired comfy humidity setting helping bring the room humidity back into the specified range. (E.g. Your set humidity range is 40% - 50%, for comfy humidity mode to trigger you need to fall by one percent to 39% or exceed by one percent to 51%).
- Once the humidity is back into the desired range for comfy humidity mode to trigger again, the room humidity needs to fall in the set range by three percent. Then only will the trigger activate when it goes outside the specified humidity range. (E.g. Your set humidity range is 40% - 50%, for comfy mode to trigger again your room humidity needs to hit 43% on the lower set range and 47% on the higher set range and now when the room humidity goes outside your desired range will the trigger activate again.