Step 1A: Mounting & placement
Cielo Breez Plus can be wall mounted using the wall mounting kit or placed on a table using table stand (both included in the box). Before finalizing the placement, it is recommended to first power up, register & test the device to find optimal location from where signals can easily reach the AC. To ensure this place your Breez Plus in ACs line of sight & power it up.
For optimal placement and control:
- Place Breez Plus within 6-12 feet and in the line of sight of your air conditioner or heat pump. If the signal is not reaching the unit, please place it in a suitable location within the room.
- To avoid deviated sensor readings, do not place Breez Plus where it may be exposed to excessive sunlight or other heat sources.
Step 1B: Powering up options
- Breez Plus can be powered up using a 5V adapter (always use the provided power adapter and USB cable for optimal results).
OR
- Through wired connection options of 24V or 12V (from your existing thermostat wiring). For details on wired connections, please refer to Wired Connection
Please DO NOT use any other voltage level to power up Breez Plus.
Please choose ONLY ONE power up option i,e, either 5V OR 24/12V.
Note: It is strongly advised that whenever there is a need to use remote control for AC/Heat Pump, point it towards Breez Plus while performing any action. This way, your AC/Heat Pump and Cielo Home App will always be in sync.
Step 1C: Prior to app installation
Your Smart Phone
- Make sure that your smart phone’s Wi-Fi is turned ON.
- Make sure that your smart phone has internet access.
Your Wi-Fi Router
- Make sure that you have working internet connection on your Wi-Fi router
- Make sure that there is no proxy server or authentication server configured on your internet connection.
- Make sure that there is no captive portal on your Wi-Fi router.
Important: Make sure that IP isolation or client isolation is turned OFF on your Wi-Fi router.
Step 2A: App Installation
Install the ‘Cielo Home’ app from the App Store.
Log in to the app if you already have an account; otherwise, create one using the sign-up option.
Step 2B: Login/Register
- You can either create a new user account or login as an existing user.
- As an existing user, enter username and password and tap the ‘Sign In’ button.
- If you are a new user, tap the ‘Sign Up’ button and fill in the information.
Step 3A: Device Registration
Device registration process connects Breez Plus to your home Wi-Fi network through the Cielo Home app.
Note:
- For iOS 13.0 & above, location permission is required to complete the registration process. You may disable it later.
- Local Network Access permission is a requirement for iOS 14.0 onwards to successfully register the device.
- Please turn off LTE/mobile data on your phone during the registration process to ensure seamless registration. You may enable it later.
Step 1: After a successful login, you will be on the home screen. Tap the 'Add Device' button, as shown in the red box.
Step 2: Select 'Cielo Breez Plus' from the list of devices.
Step 3: Power-on the Cielo Device and press ‘Next’.
Step 4: Go to the Wi-Fi settings of your phone.
Step 5: Select the Cielo Device (Cielo_xxxx_xxxxxx) from the Wi-Fi list.
Step 6: Come back to the Cielo Home App.
Step 7: Your phone will show the list of available Wi-Fi networks. Select your preferred Wi-Fi network from the list to proceed further.
Step 9: Customize your device with a name of your choice (for example, Bedroom, Lounge, Office, etc.). Then tap on 'Done'.
Step 10: Your device has been configured successfully. Tap on ‘Done’.
Step 11: After successful configuration, your device will display on your home screen.
Step 12: Once the circle around the AC icon is green, tap on it to start the AC remote control configuration process. If the circle around the AC icon is not green, refresh the screen by swiping downwards.
Step 13: Get a hold of your AC’s remote and tap ‘Next’.
Step 14: Point your AC's remote at the Cielo Device and press the remote’s 'Power Button' once. It will start the processing & configuration process.
Step 15: The configuration screen will display your detected remote control. Tap on ‘Send a test on/off command’.
Step 16: Your remote has now been successfully paired with the Cielo Device. Tap on ‘Done.’
Registration process is complete. Enjoy the unlimited controls!
Quick Tip: All four buttons at the bottom of Breez Plus will blink once at the same time after receiving the remote control's signal. If they do not blink, please check the batteries of the remote control.
Your home screen
Your home screen shows the real-time status of all your Cielo Devices.
A registered Cielo Device can show either of the 3 status, outlined in circles:
1 - Green - Device is online. You’re good to go!
2 - Red - Device is offline. (try following options)
- Ensure your phone is connected to a working internet connection.
- Refresh home screen by swiping downwards (Pull-to-refresh).
- Ensure device is connected to a working internet connection.
3 - Grey - Device is offline. (try following options)
- Ensure your phone is connected to a working internet connection
- Device is synchronizing with the Cielo cloud.
- Refresh home screen by swiping downwards (Pull-to-refresh).
Enjoy the unlimited functionalities
Configuring the right remote control for your AC
Cielo Device auto detects relevant remote control for your AC during the registration process. If it is not working with your AC, please select your remote model manually.
For manual selection, follow these steps:
A. Go to device settings by tapping 'gear' symbol on the registered device.
B. Select 'Change Appliance'.
C. Select 'Manual Configuration'.
D. Select the 'Manufacturer' & 'Remote Model' of your AC from the drop down lists and tap 'Confirm'.
E. After tapping on 'Confirm', the new remote model will be registered with your Cielo device. Send a test On/Off command, and confirm that the AC receives the signal. If so, tap on 'Done'.
Quick Tip: Remote control model number is usually found at the back side of remote control as shown in the image.
Breez Plus - Local control options
Adjusting the temperature of your AC:
Use the up or down arrows to set the temperature of your choice.
Changing the mode of your AC:
Touch the menu button once. The menu icon will start blinking. Use the up or down arrows to select the mode (e.g. Cool, Heat etc.). Your selected mode is set.
Changing the fan speed:
Touch the menu button twice. The fan speed icon will start blinking. Use the up or down arrows to change the fan speed. Your selected fan speed is set.
Adjusting the swing position:
Touch the menu button thrice. The swing position icon will start blinking. Use the up or down arrows to select the swing position. Your selected swing position is set.
Changing multiple settings in one go:
You can set mode, swing position & fan speed in one go. Touch the menu button once and select the mode of your choice. Touch the menu button again and adjust the fan speed. Touch the menu button again and select the swing position. All your settings are completed in one go.
Turning the display of Breez Plus On/Off:
Press the Temperature Down Button for six seconds and release.
Locking/Unlocking the display Interface:
Press and hold the Temperature Up and Temperature Down buttons simultaneously for six seconds and release.
Enabling/Disabling Wi-Fi of Breez Plus:
Press and hold the Temperature Up Button for 7 seconds and release.
Resetting the Wi-Fi of Breez Plus:
Press and hold Temperature Up and Power buttons simultaneously for six seconds and release.
Wifi Icon:
Breez Plus display interface shows 3 types of Wi-Fi status:
Case 1: Stable Wi-Fi Icon - Device is connected to internet, showing the strength of Wi-Fi signal.
Case 2: Blinking Wi-Fi Icon - Device in broadcast (AP) mode. If you have not registered the device yet, please complete registration process as per step 3A/3B of this manual. If you have registered the device, refer to scenario 3.
Case 3: Wi-Fi Icon with small triangle - Device connected with router but has no internet access. Please ensure you have a working internet connection and restart the device.
Changing Wi-Fi network of Cielo Device
Scenario 1:
Cielo Device & mobile are on same Wi-Fi network - Tap on the 'Settings' icon to enter device settings. Tap on ‘Device Wi-Fi’ then on 'Change Wi-Fi'. List of available networks will appear. Enter password of selected network. New settings are done.
Scenario 2:
Cielo Device & mobile are on different Wi-Fi network - Go to your mobile settings and connect your mobile with same Wi-Fi network as Cielo Device. The remaining process is same as given in scenario 1.
Scenario 3:
Cielo Device is in broadcast (AP) mode - Connect mobile with Cielo Device Wi-Fi i.e. Cielo_xxxx_xxxxxx in mobile Wi-Fi settings. Go back to ‘Cielo Home’ App. Tap on the 'Settings' icon to enter device settings. Tap on ‘Device Wi-Fi’ then on 'Change Wi-Fi' button. List of available Wi-Fi networks will appear. Select your Wi-Fi & enter its password. Your new Wi-Fi settings are done.
Instruction for Breez Plus wired connections (24V OR 12V)
Step 1:
Switch off power by using the master switch or mains circuit breaker. This is very important for your safety.
Step 2:
Find a point where 24V or 12V is available (e.g. the point where thermostat wiring is available). Ensure that chosen point is also in the line of sight of your AC. Please DO NOT use any other voltage level to power up Breez Plus.
Step 3:
Chose the C & R wires. Pull these wires and pass them through the hole of back plate of Breez Plus. Screw in the back plate of Breez Plus into the wall.
Step 4:
Breez Plus has two connections marked as 24V on its back. Connect the C & R wires at these two connections.
Step 5:
Press fit the Breez Plus on its back plate.
Your Installation is complete. Please switch on the power from the mains.
Note: In case of any doubt, please contact a local professional for making the wired connections. You can also use the Breez Plus with a 5V adapter (included in the box).
Step 4A: Setting up schedules for your heating and cooling
1. Setting up a schedule
You can schedule your air conditioner/ heat pump connected to Breez Plus by performing the following steps on your Cielo Home app:
Step 1: On the Home screen, tap on the Air-Conditioner / Heat Pump you want to schedule.
Step 2: Tap on ‘Schedule’ in the navigation bar.
Step 3: Tap on '+ Add Schedule'.
Step 4: Tap on ‘Custom Schedule’.
Step 5: Select the time/days you want to set the schedule for. Tap on 'Custom Settings'.
Step 6: Select the power state, mode, temperature, and fan speed of your choice and tap on ‘Done’.
Step 7: Label the schedule and tap on 'Save' to set it up.
Once the schedule is set, it will appear on the schedule tab. You can turn it On/Off by toggling the slider against the schedule.
2. Adding Comfy Schedule
To schedule Comfy mode, you need to save at least one template setting in the app. After you have done that, follow the steps below.
Step 1: On the Home screen, select the air conditioner/ heat pump you want to schedule.
Step 2: Tap on ‘Schedule’ in the navigation bar.
Step 3: Tap on ‘+ Add Schedule’.
Step 4: Select ‘Comfy Schedule’.
Step 5: Select the time/days you want to set the schedule for and whether you want to set it as a repeat schedule. Tap on 'Custom Settings'.
Step 6: Select the power state, mode, temperature, and fan speed of your choice and tap on 'Done'.
Step 7: Select your desired Comfy template. Tap on 'Save' to set up the schedule.
Once the Comfy schedule is set, it will appear on the schedules tab. You can enable/disable it by toggling the slider against the schedule.
3. Deleting/Editing a schedule
Step 1: From the device control screen, tap on ‘Schedule’ in the navigation bar.
Step 2: In the 'Schedule' tab, you will see all your set schedules.
Step 3: Swipe left on the schedule you want to edit or delete until both options for Edit/Delete appear. Choose your desired option and proceed. You can also swipe until the left edge of the screen to delete the schedule.
Step 4B: Setting up Comfy Temperature Mode (Automatically change your AC settings if room temperature goes above or falls below a pre-set value)
You can set up comfy temperature mode for your air conditioner/heat pump by performing these steps via Cielo Home app:
Step 1: On the Home screen, tap on the air conditioner/heat pump you want to set comfy
temperature mode on.
Step 2: Tap on ‘eSaver’ in the navigation bar.
Step 3: Tap on 'Comfy'.
Step 4: Tap on 'Add Template' under the Comfy Temperature heading.
Step 5: Select what actions to perform if the temperature falls below or goes above the set range, e.g. turning the AC off or on, changing its mode, temperature, fan speed, and swing position to help it get back into the preferred temperature range. Add a name for this template and tap on ‘Done’.
Step 6: Your Comfy settings are now saved. It is disabled by default. You can turn Comfy 'On' from the toggle next to the name of the Comfy template. Once the device triggers the defined comfy temperature mode actions, you will get a notification in your app timeline.
Note: You can set up multiple Comfy settings through Comfy templates. Each of the templates can be turned 'On' or 'Off' from the toggle next to its name. You can have a different Comfy Mode for the morning, a different mode for the afternoon, and so on.
Step 7: You can turn Comfy Mode On/Off from the app control screen. Tap on the 'Up' arrow icon at the bottom of the control screen.
Step 8: In the pop-up navigation bar, tap on 'Comfy' to toggle it On or Off. The greyed-out icon shows that it is currently Off.
Step 9: Select the desired Comfy Mode from the list of available settings, in this case, 'Temperature'.
Step 10: Comfy Mode is now active, and the Comfy icon will turn white. It is now turned 'On'.
Step 4C: Setting up Comfy Humidity Mode (Automatically change your AC settings if room humidity goes above or falls below a pre-set value)
You can set up comfy humidity mode for your air conditioner/heat pump by performing these steps via Cielo Home app:
Step 1: On the Home screen, tap on the air conditioner/heat pump you want to set comfy
humidity mode on.
Step 2: Tap on ‘eSaver’ in the navigation bar.
Step 3: Tap on 'Comfy'.
Step 4: Tap on ‘Add Template' to set up a Comfy Humidity template.
Step 5: Select what actions to perform if the humidity falls below or goes above the set range, e.g., turning the AC off or on, changing its mode, temperature, and fan speed to help it get back into the preferred humidity range. Add a name for this template and tap on ‘Done’.
Step 6: 'Comfy Humidity' is now set. You can turn Comfy Mode 'On' or 'Off' from the toggle next to the name of the Comfy Mode. Once the device triggers the defined comfy humidity mode actions, you will get a notification in your app timeline.
You can turn Comfy Mode On/Off from the app control screen.
Step 7: Tap on the 'Up' arrow icon at the bottom of the control screen.
Step 8: On the pop-up navigation bar, tap on 'Comfy' to toggle it On or Off. Currently, it is turned 'Off', shown by the greyed-out icon.
Step 9: To turn it 'On', tap on the Comfy icon, and it will turn white. It is now turned 'On'.
Step 4D: Enabling Location Control (Turn your AC on before you arrive and turn it off after you have left the pre-set location)
You can configure location-based control for your Air-Conditioner / Heat Pump by performing these steps via Cielo Home app:
Step 1: On the Home screen, tap on the air conditioner/heat pump you want to control
through location controls.
Step 2: Tap on ‘eSaver’ in the navigation bar.
Step 3: Tap on ‘Geofencing’.
Step 4: Toggle the slider to enable Location Control, as shown in the red box.
Step 5: You will see your current location on the map. Set a Geo-Fence range for your Air-Conditioner/ Heat Pump between 1 - 10 Miles using the slider. Entering or exiting this range will trigger the Air-Conditioner / Heat Pump ON/ OFF. Tap on 'Next'.
Step 6: Select your desired AC settings to be performed when you enter or exit the pre-set location and tap on ‘Done’. Once location controls are triggered, you will get a notification
in your app timeline.
Step 4E: Setting up Temperature Range Lock (Set a minimum and maximum temperature value so that your AC runs within that range)
You can set up a temperature range lock for your Air-Conditioner / Heat Pump by performing these steps via the Cielo Home app:
Step 1: On the Home screen, tap on the air conditioner/heat pump for which you want to set the temperature range lock.
Step 2: Tap on ‘eSaver’ in the navigation bar.
Step 3: Tap on 'Range Temperature Lock'.
Step 4: Toggle the slider to enable temperature range lock, as shown in the red box.
Step 5: Choose your preferred temperature range to operate the AC in. Tap on 'Done'.
Step 6: Now the device control screen temperature slider will be restricted to the temperature range specified. The white region on the temperature slider is inaccessible.
Note: Setting a temperature range will disable all schedules, location controls, and comfy mode in case the selected temperature range conflicts with the previously set values. These modes can be set again later within the specified temperature range.
Step 4F: Checking your AC’s Air Filter Status
You can check the live air filter status of your Air-Conditioner / Heat Pump. Simply, follow the steps listed below:
Step 1: On the Home screen, tap on the Air-Conditioner / Heat Pump you want to check the
air filter status for.
Step 2: Tap on ‘eSaver’ in the navigation bar.
Step 3: Tap on ‘Air Filter’.
Step 4: You will see your current air filter status of the AC being used with the Device since registration (or since the last cleaning). When the range is about to fill up, manually remove the AC’s air filter and clean it. Once done, place the filter back into the AC. Tap on ‘I have cleaned the air filter’.
Step 5/6: Your filter status has now begun a new cycle.
Step 4G: Adding Siri Shortcuts to Cielo Home (For iOS users)
Step 1: On the Home screen, tap on the air conditioner/heat pump you want to add Siri Shortcuts for.
Step 2: Tap on ‘eSaver’ in the navigation bar.
Step 3: Tap on ‘Siri Shortcuts’.
Step 4: Tap on 'Create Shortcut' to make a new Siri Shortcut.
Step 5: Enter the desired AC settings when the command is sent through Siri Shortcuts. You can set the AC operating mode, temperature set point, and fan speed. Tap on ‘Done’.
Step 6: Next enter the phrase you want the Shortcut to be activated on. In this example, 'Cool The Room'. Tap on 'Add to Siri'.
Step 7: All your currently active Siri Shortcuts will now be displayed. In this example, when you say to Siri 'Cool The Room', the AC will turn on at 73 degrees in cool mode at high fan speed.
Step 4H: Checking Usage History
Step 1: On the Home screen, tap on the air conditioner/heat pump you want to check Usage history for.
Step 2: On the Control screen, Tap on 'History'.
Step 3: Your 30-day usage summary should appear on the screen. Tap on any day to learn more details about your detailed usage history.
Step 4I: Checking Timeline of Actions
Step 1: On the Home screen, tap on the air conditioner/heat pump you want to check the timeline of.
Step 2: On the Control screen, Tap on 'Timeline'.
Step 3: You'll see a complete list of actions performed over the last 90 days.
Step 4J: Change Appliance (Manufacturer/Model Number)
Step 1: On the Home screen, tap on the Breez Plus device you want to change the appliance for.
Step 2: Tap on the ‘Settings’ icon on the top right.
Step 3: Tap on ‘Change Appliance’.
Step 4: Tap on 'Manual Configuration'.
Step 5: Tap on the 'Manufacturer' and select the appropriate AC manufacturer from the drop down list.
Step 6: Tap on 'Remote Model' and select your remote model from the drop down list. In this case 'Model 1 (Celsius)'.
Step 7: Tap on 'Confirm' once you have selected the correct AC manufacturer and remote model.
Step 8: Once selected, send a test On/Off command to your AC. Once the AC accepts the command, tap on 'Done'.
Step 4K: Changing Device Name (e.g. bedroom, lounge etc.)
Step 1: On the Home screen, tap on the air conditioner/heat pump you want to change the name of.
Step 2: Tap on the ‘Settings’ icon on the top right.
Step 3: Tap on ‘Device Preferences’.
Step 4: Tap on ‘Device Name’.
Step 5: Select the new name from a list of common names, or type a custom name.
Step 6: Type the new name of the device, and tap on 'Done'. Device name is now changed.
Step 4J: Switch temperature units between Centigrade and Fahrenheit
Step 1: On the Home screen, tap on the air conditioner/heat pump you want to change the units of.
Step 2: Tap on the ‘Settings’ icon on the top right.
Step 3: Tap on ‘Device Preferences’.
Step 4: Tap on the C to F toggle against 'Temperature Unit'.
Step 5: Your device's temperature units are changed successfully from Fahrenheit to Celsius.
Step 4K: Enable or disable touch control function on Breez Plus Device
Step 1: On the Home screen, tap on the Breez Plus device you want to lock/unlock.
Step 2: Tap on the ‘Settings’ icon on the top right.
Step 3: Tap on ‘Device Preferences’.
Step 4: Tap on 'Touch'.
Step 5: You can now enable or disable the device touch control.
Step 4L: Breez Plus Device Display Settings
1. Switching Device (Breez Plus) Display Screen ON/OFF
Step 1: On the Home screen, tap on the Breez Plus device you want to turn the display On/Off for.
Step 2: Tap on the ‘Settings’ icon on the top right.
Step 3: Tap on ‘Device Preferences’.
Step 4: In Device preferences, tap on 'Display'.
Step 5/6: Toggle the Breez Plus display On or Off as shown.
2. Adjusting the brightness of Device (Breez Plus) Screen
Step 1: On the Home screen, tap on the Breez Plus device you want to change the brightness of.
Step 2: Tap on the ‘Settings’ icon on the top right.
Step 3: Tap on ‘Device Preferences’.
Step 4: In Device preferences, tap on 'Display'.
Step 5/6: Slide the 'Brightness' slider to change the brightness of the Breez Plus device.
Step 4M: Calibrate Room Temperature
Step 1: On the Home screen, tap on the Breez Plus device you want to calibrate.
Step 2: Tap on the ‘Settings’ icon on the top right.
Step 3: Tap on ‘Device Preferences’.
Step 4: Tap on 'Calibration'.
Step 5: Adjust the temperature as required.
Step 6: Tap on 'Done'. Your device has now been calibrated.
Step 4N: Calibrate Room Humidity
Step 1: On the Home screen, tap on the Breez Plus device you want to calibrate.
Step 2: Tap on the ‘Settings’ icon on the top right.
Step 3: Tap on ‘Device Preferences’.
Step 4: Tap on 'Calibration'.
Step 5: Tap on 'Temperature'.
Step 6: From the drop down menu, tap on 'Humidity'. Adjust the humidity as required.
Step 7: Tap on 'Done'. Your device has now been calibrated.
Step 4O: Group Setting of your connected Air Conditioners
1. Creating a group
To create a Group in Cielo Home app, follow these steps:
Step 1: On the Home screen, tap on the Breez Plus device you want to move to a group.
Step 2: Tap on the ‘Settings’ icon on the top right.
Step 3: Tap on ‘Device Preferences’.
Step 4: Tap on ‘Move to Group.
Step 5: Tap on ‘Add’ to create a group.
Step 6: Give your group a name (e.g. Ground floor, First floor, Basement, etc.)
Step 7: Choose an icon.
Step 8: Group is created successfully.
2. Adding a Device to a Group
Step 1: On the Home screen, tap on the Breez Plus device.
Step 2: Tap on the ‘Settings’ icon on the top right.
Step 3: Tap on ‘Device Preferences’.
Step 4: Tap on ‘Move to Group’.
Step 5: On the Group screen, you will see a list of all of your active groups. Tap on the group you wish to move the device to.
Step 6: You will see a checkmark next to the group name.
Step 7: Tap on ‘Done’.
Step 8: On the Home screen, you will see a separate ‘Groups’ tab where you can see your groups along with their devices.
3. Removing a Device from a group
Step 1: On the Home Screen, go to the ‘Groups’ section at the bottom and select your created group.
Step 2: Tap on the device you want to remove from your group.
Step 3: Go to the ‘Settings’ on the top right.
Step 4: Tap on ‘Device Preferences’.
Step 5: Tap on ‘Remove from Group.’
Device removed from the group successfully.
4. Editing a Group
Step 1: Tap on the ‘Settings’ icon of the group you wish to edit.
Step 2: In group settings, tap on ‘Edit Group. You can change the icon and name of the group as you desire.
Step 3: Tap on 'Done'.
5. Deleting a Group
Note: To delete a group, you have to remove all the devices added to it individually. You may not be allowed to delete a group otherwise. To delete a device from a group, refer to Section 3.
Step 1: Tap on the ‘Settings’ icon of the group you wish to edit.
Step 2: In group settings, tap on ‘Delete Group’.
Step 4P: Changing Wi-Fi
Step 1: On the Home screen, tap on the Breez Plus device you want to change the Wi-Fi of.
Step 2: Tap on the ‘Settings’ icon on the top right.
Step 3: Tap on ‘Device Wi-Fi’.
Step 4: Tap on 'Change Wi-Fi'.
Step 5: Tap on the intended Wi-Fi network.
Step 6: Enter the password of the Wi-Fi network. Tap on 'Connect'.
Step 7: The device Wi-Fi is now changed.
Step 4Q: Disable Wi-Fi (Operate Device only with local controls)
Step 1: On the Home screen, tap on the Breez Plus device you want to disable the Wi-Fi of.
Step 2: Tap on the ‘Settings’ icon on the top right.
Step 3: Tap on ‘Device Wi-Fi’.
Step 4: Tap on the toggle next to 'Disable Wi-Fi' to disable Wi-Fi.
Step 5: Tap 'Ok' on the confirmation prompt.
Step 6: Device Wi-Fi is now disabled.
Note: If you disable the Wi-Fi using your phone, it can ONLY be enabled from the device. To Enable it again, please ‘press and hold the temperature up button on Device for seven seconds and release’.
Step 4R: Sync AC State (e.g. AC is ON and App is showing it as
OFF)
Step 1: On the Home screen, tap on the Breez Plus device you want to sync with your AC.
Step 2: Tap on the ‘Settings’ icon on the top right.
Step 3: Tap on ‘Sync AC State’.
Step 4: Select the AC parameters which you want on your Breez Plus device. Then tap on 'Sync'. The Breez Plus device will now display these selected parameter values.
Step 4S: Removing your Device (Breez Plus)
Step 1: On the Home screen, tap on the Breez Plus device you want to delete.
Step 2: Tap on the ‘Settings’ icon on the top right.
Step 3: Tap on ‘Remove Device’.
Step 4: Tap on 'Remove' on the pop-up. Your device is now removed.
Comments
0 comments
Please sign in to leave a comment.