What is Comfy Mode and how can I activate it?

Using Comfy Mode, you can set up intelligent temperature or humidity triggers to maintain a comfortable room environment. 

Setting up Comfy Temperature Mode (Automatically change your AC settings if room temperature goes above or falls below a pre-set value)

You can set up comfy temperature mode for your air conditioner/heat pump by performing these steps via Cielo Home app:

Step 1: On the Home screen, tap on the air conditioner/heat pump you want to set comfy
temperature mode on.

Step 2: Tap on ‘eSaver’ in the navigation bar.

Step 3: Tap on 'Comfy'.

Step 4: Tap on 'Add Template' under the Comfy Temperature heading.

Step 5: Select what actions to perform if the temperature falls below or goes above the set range, e.g. turning the AC off or on, changing its mode, temperature, fan speed, and swing position to help it get back into the preferred temperature range. Add a name for this template and tap on ‘Done’.

Step 6: Your Comfy settings are now saved. It is disabled by default. You can turn Comfy 'On' from the toggle next to the name of the Comfy template. Once the device triggers the defined comfy temperature mode actions, you will get a notification in your app timeline.

Note: You can set up multiple Comfy settings through Comfy templates. Each of the templates can be turned 'On' or 'Off' from the toggle next to its name. You can have a different Comfy Mode for the morning, a different mode for the afternoon, and so on.

Step 7: You can turn Comfy Mode On/Off from the app control screen. Tap on the 'Up' arrow icon at the bottom of the control screen.

Step 8: In the pop-up navigation bar, tap on 'Comfy' to toggle it On or Off. The greyed-out icon shows that it is currently Off.

Step 9: Select the desired Comfy Mode from the list of available settings, in this case, 'Temperature'.

Step 10: Comfy Mode is now active, and the Comfy icon will turn white. It is now turned 'On'.

Step 4C: Setting up Comfy Humidity Mode (Automatically change your AC settings if room humidity goes above or falls below a pre-set value)

You can set up comfy humidity mode for your air conditioner/heat pump by performing these steps via Cielo Home app:

Step 1: On the Home screen, tap on the air conditioner/heat pump you want to set comfy
humidity mode on.

Step 2: Tap on ‘eSaver’ in the navigation bar.

Step 3: Tap on 'Comfy'.

Step 4: Tap on ‘Add Template' to set up a Comfy Humidity template.

Step 5: Select what actions to perform if the humidity falls below or goes above the set range, e.g., turning the AC off or on, changing its mode, temperature, and fan speed to help it get back into the preferred humidity range. Add a name for this template and tap on ‘Done’.

Step 6: 'Comfy Humidity' is now set. You can turn Comfy Mode 'On' or 'Off' from the toggle next to the name of the Comfy Mode. Once the device triggers the defined comfy humidity mode actions, you will get a notification in your app timeline.

You can turn Comfy Mode On/Off from the app control screen.

Step 7: Tap on the 'Up' arrow icon at the bottom of the control screen.

Step 8: On the pop-up navigation bar, tap on 'Comfy' to toggle it On or Off. Currently, it is turned 'Off', shown by the greyed-out icon.

Step 9: To turn it 'On', tap on the Comfy icon, and it will turn white. It is now turned 'On'.