How can I link Comfy Mode when setting up a Schedule using Breez Lite?

To link Comfy Mode with Schedule, you need to set up Comfy Mode at least once in the app (First time only, it will always show you linking option afterwards in your schedule settings). In this case follow the steps mentioned below:

In case you've been using Comfy Mode prior then an option to link Comfy with your Schedule will show in your schedule settings anyhow.

Setting up Comfy mode

Step 1: On the Home screen, tap on the Air-Conditioner / Heat Pump you want to set Comfy temperature mode on.

Step 2: Tap on ‘eSaver’ in the navigation bar.

Step 3: Tap on 'Comfy Mode'.

Step 4: Tap on 'Comfy Temperature' to set up Comfy Mode. 

Step 5: Select what actions to perform if the temperature falls below or goes above the set range e.g. turning the AC off or on, changing its mode, temperature, and fan speed helping it get back into the preferred temperature range. Tap 'Done' to enable it.

Step 6: 'Comfy Temperature' is now set. You can turn Comfy Mode 'On' or 'Off' from the toggle next to the name of the Comfy Mode. Once the device triggers the defined comfy temperature mode
actions, you will get a notification in your app timeline.

Note:You can set up multiple Comfy Mode settings through Comfy templates. Each of the template can  be turned 'On' or 'Off' from the toggle next to its name. You can have a different Comfy Mode for the morning, a different mode for the afternoon, and so on. To set different Comfy Modes, simply tap on the specific Comfy template you want to set, and follow the steps in this section.

Step 7: You can turn Comfy Mode On/Off from the device control screen. Tap on the 'Up' arrow icon at the bottom of the control screen.

Step 8: On the pop-up navigation bar, tap on 'Comfy' to toggle it On or Off. Currently, it is turned 'Off',      shown by the greyed-out icon.

Step 9: Select the desired Comfy Mode from the list of available Comfy settings. In this case, 'Comfy Temperature'. 

Step 10: Comfy Mode is now active, and the Comfy icon will turn white. It is now turned 'On'. 

Setting up a Schedule

You can schedule your Air-Conditioner / Heat Pump connected to Breez Lite by performing the following steps on your Cielo Home app:

Step 1: On the Home screen, tap on the Air-Conditioner / Heat Pump you want to schedule.

Step 2: Tap on ‘Schedule’ in the navigation bar.

Step 3: Tap on the '+' icon as shown.

Step 4: You can turn the Air-Conditioner / Heat Pump ON/OFF via schedule, select the time, mode, temperature and fan speed of your choice. Select power ON/OFF and select the day/days you want to set the schedule for. You may also choose the schedule name of your choice. Tap 'Done' to set-up the schedule.

Step 5: Once the schedule is set, it will appear on the schedule tab. You can turn it On/Off by toggling the slider against the schedule. 

Note: You can also link your Comfy Settings to execute within your Schedules and may also enable or
disable them to your liking. You can do this by tapping on 'Comfy State'. When enabled, the currently active Comfy Mode will also be applied to the schedule. When disabled, there will be no Comfy Mode running with the schedules. When you choose the option 'Do Nothing', the currently active state of Comfy Mode will remain as it is.