Detailed User Manual

Step 1A: Unboxing, mounting & placement 

Cielo Breez can be wall mounted using the wall mounting kit or placed on a table using table stand (both included in the box). Please mount your Breez on a wall or place it on a table in AC's line of sight.

For optimal placement and control:

• Place Cielo Breez around 6½ –13 feet (2 – 4 meters) away and in the line of sight of your air conditioner or heat pump.
• To avoid deviated sensor readings, do not place Breez where it may be exposed to excessive sunlight or other heat sources.

Special Note: It is strongly advised that whenever there is a need to use remote control for AC/Heat Pump, point it towards Breez while performing any action. This way your AC/Heat Pump and Cielo Home App will always be in sync.

Step 1B: Powering up

Plug in and power up Breez using the 5V adapter (always use the provided power adapter and USB cable for optimal results).

Step 1C: Prior to app installation

Your Smart Phone

• Make sure that your smart phone’s Wi-Fi is turned ON.
• Make sure that your smart phone has internet access.

Your Wi-Fi Router

• Make sure that you have working internet connection on your Wi-Fi router.
• Make sure that there is no proxy server or authentication server configured on your internet connection.
• Make sure that there is no captive portal on your Wi-Fi router.

Important: Make sure that IP isolation or client isolation is turned OFF on your Wi-Fi router.

Step 2A: App installation

• Go to the App Store / Play Store.
• In ‘search’ section type ‘Cielo Home’.
• Once ‘Cielo Home’ App is displayed, tap the ‘GET’ button.
• Open the App after installation is complete.

Step 2B: Login/register

• You can either create a new user account or login as an existing user.
• As an existing user, enter username and password and tap the ‘Sign In’ button.
• If you are a new user, tap the ‘Sign Up’ button and fill in the information.

3A: Registration - iOS users

Note 1: Registration process is meant to connect the Breez to your home Wi-Fi network through the ‘Cielo Home’ App.

Note 2: For iOS 13.0 & above, location permission is required to complete the registration process. You may disable it later.

Note 3: Please turn off LTE/mobile data on your phone during the registration process to ensure seamless registration. You may enable it later.

Step 1: After successful login, you are at the home screen. Tap the add device button as shown in the red              box.

Step 2: Select 'Cielo Breez' from the list of devices.

Step 3: Power-up the Cielo Device and press ‘Next’.

Step 4: Go to the Wi-Fi settings of your phone.

Step 5: Select the Cielo Device (Cielo_xxxx_xxxxxx) from the Wi-Fi list.

Step 6: Come back to the Cielo Home App.

Step 7: Your phone will show the list of available Wi-Fi networks.

Step 8: Select your preferred Wi-Fi network from the list, enter the password and tap the 'Connect'                        button.

Step 9: Customize your device with a name of your choice (for example, Bedroom, Lounge, Office, etc.).                 Then tap on 'Done'.

Step 10: Select the remote control model of your air conditioner, and tap on 'Confirm'. 

Step 11: Your device has been configured successfully. Tap on ‘Done’. 

Step 12: After successful configuration, your device will display on your home screen. Once the circle                        around the AC icon is green, tap on it to start the AC remote control configuration process. If                      circle around the AC icon is not green, refresh screen by swiping downwards.

Registration process is complete. Enjoy the unlimited controls! 

Step 3B: Registration - Android users     

Note 1: Registration process is meant to connect the Breez to your home Wi-Fi network through the ‘Cielo Home’ App.

Note 2: For Android OS 8.1 & above, location permission is required to complete the registration process. You may disable it later.

Note 3: Please turn off LTE/mobile data on your phone during the registration process to ensure seamless registration. You may enable it later.

Step 1: After successful login, you are at the home screen. Tap the add device button as shown in the red              box.

Step 2: Select 'Cielo Breez' from the list of devices.

Step 3: Power-up the Cielo Device and press ‘Next’

Step 4: Tap the ‘Wi-Fi Settings’ button as highlighted in red.

Step 5: Connect your phone to the Cielo Device Wi-Fi (Cielo_xxxx_xxxxxx).

Step 6: Go back to ‘Cielo Home’ App.

Step 7: Your phone will show the list of available Wi-Fi networks.

Step 8: Select your preferred Wi-Fi network from the list, enter the password
            and tap the 'Connect' button.

Step 9: Customize your device with a name of your choice (for example, Bedroom, Lounge, Office, etc.).                 Then tap on 'Done'.

Step 10: Select the remote control model of your air conditioner, and tap on 'Confirm'. 

Step 11: Your device has been configured successfully. Tap on ‘Done’. 

Step 12: After successful configuration, your device will display on your home screen. Once the circle                        around the AC icon is green, tap on it to start the AC remote control configuration process. If                      circle around the AC icon is not green, refresh screen by swiping downwards.

Registration process is complete. Enjoy the unlimited controls! 

Your home screen

Your home screen shows the real time status of all your Cielo Devices.

A registered Cielo Device can show either of the 3 status, outlined in circles:

1 - Green - Device is online. You’re good to go!

2 - Red - Device is offline. (try following options)

• Ensure your phone is connected to a working internet connection.
• Refresh home screen by swiping downwards (Pull-to-refresh).
• Ensure device is connected to a working internet connection (refer to the troubleshooting section below).

3 - Grey - Device is offline. (try following options)

• Ensure your phone is connected to a working internet connection.
• Refresh home screen by swiping downwards (Pull-to-refresh).

Enjoy the unlimited functionalities

 

Cielo Breez Works With Amazon Alexa, the Google Assistant, Siri Shortcuts, and Samsung SmartThings 

Touch Controls on your Device (Cielo Breez)

You can control the temperature of your Air-Conditioner/Heat pump through touch controls on your Device.

• To increase the temperature of your AC, tap Up.
• To decrease the temperature of your AC, tap Down.

All actions performed via touch controls will be displayed in the App timeline.

Note: You will not be able to change the temperature of your Air-Conditioner/Heat Pump
through the temperature control buttons if there is no internet and/or Cielo Breez is Offline.

Troubleshooting: Changing Wi-Fi network of Cielo Device

Scenario 1:

Cielo Device & mobile are on same Wi-Fi network - Tap on 'Settings' icon to enter device settings. Tap on ‘Device Wi-Fi’ then on 'Change Wi-Fi'. List of available networks will appear. Enter password of selected network. New settings are done.

Scenario 2:

Cielo Device & mobile are on different Wi-Fi network - Go to your mobile settings and connect your mobile with same Wi-Fi network as Cielo Device. The remaining process is same as given in scenario 1.

Note: In case your mobile couldn't connect to same Wi-Fi network as Cielo Device; touch & hold both arrow buttons on Device for 4 seconds to hard reset Wi-Fi settings. This will take Cielo Device in broadcast (AP) mode.

Scenario 3:

Cielo Device is in broadcast (AP) mode - Connect mobile with Cielo Device Wi-Fi i.e. Cielo_xxxx_xxxxxx in mobile Wi-Fi settings. Go back to ‘Cielo Home’ App. Tap on 'Settings' icon to enter device settings. Tap on ‘Device Wi-Fi’ then on 'Change Wi-Fi'. List of available Wi-Fi networks will appear. Select your Wi-Fi & enter its password. Your new Wi-Fi settings are done.

Quick Tip: Finding the Right Remote Model Number

Cielo Device auto detects relevant remote control for your AC during registration process. If it is not working with your AC, please select your remote model manually.

For manual selection, follow these steps:

A. Go to device settings by tapping 'gear' symbol on the registered device.

B. Select 'Change Appliance'.

C. Select the 'Manufacturer' & 'Remote Model' of your AC from the drop down lists and tap 'Confirm'.

E. After tapping on 'Confirm', the new remote model will be registered with your Cielo device. Send a test On/Off command, and confirm that the AC receives the signal. If so, tap on 'Done'. 

Note: If your specified remote model is not available in the list, you can contact us for support.

Step 4A: Setting up schedules for your heating and cooling -
                iOS users

1. Setting up a schedule

You can schedule your Air-Conditioner / Heat Pump connected to Breez by performing following steps on your Cielo Home app:

Step 1: On the Home screen, tap on the Air-Conditioner / Heat Pump you want to schedule.

Step 2: Tap on ‘Schedule’ in the navigation bar.

Step 3: Tap on the '+' icon as shown.

 

Step 4: You can turn the Air-Conditioner / Heat Pump ON/OFF via schedule, select the time,
            mode, temperature and fan speed of your choice. Select power ON/OFF and select the 
            day/days you want to set the schedule for. You may also choose the schedule name of 
            your choice. Tap 'Done' to set-up the schedule.

Step 5: Once the schedule is set, it will appear on the schedule tab. You can turn it On/Off by toggling the              slider against the schedule. 

2. Deleting/Editing a schedule

Step 1: From the device control screen, tap on ‘Schedule’ in the navigation bar.

Step 2: In the 'Schedule' tab, you will see all your set schedules.

Step 3: Swipe left on the schedule you want to edit or delete until both options for Edit/Delete appear.
            Choose your desired option and proceed. You can also swipe until the left edge of the screen to                  delete schedule.

Step 4B: Enabling Location Control (Turn your AC on before
                you arrive and turn it off after you have left the
                pre-set location) - iOS users

You can configure location based control for your Air-Conditioner / Heat Pump by performing these steps via Cielo Home app:

Step 1: On the Home screen, tap on the Air-Conditioner / Heat Pump you want to control
             through location controls.

Step 2: Tap on ‘eSaver’ in the navigation bar.

Step 3: Tap on ‘Geofencing’.

Step 4: Toggle the slider to enable Location Control, as shown in the red box. 

Step 5: You will see your current location on the map. Set a Geo-Fence range for your Air-Conditioner/                  Heat Pump between 1 - 10 Miles using the slider. Entering or exiting this range
            will trigger the Air-Conditioner / Heat Pump ON/ OFF. Tap on 'Next'.

Step 6: Select your desired AC settings to be performed when you enter or exit the pre-set
             location and tap on ‘Done’. Once locations controls are triggered you will get a notification
             in your app timeline.

Step 4C: Checking your AC’s Air Filter Status - iOS users

You can check the live air filter status of your Air-Conditioner / Heat Pump. Simply, follow the steps listed below:

Step 1: On the Home screen, tap on the Air-Conditioner / Heat Pump you want to check the 
             air filter status for.

Step 2: Tap on ‘eSaver’ in the navigation bar.

Step 3: Tap on ‘Air Filter’.

Step 4: You will see your current air filter status of the AC being used with the Device since registration                  (or since the last cleaning). When the range is about to fill up, manually remove the AC’s air filter                and clean it. Once done, place filter back into the AC. Tap on ‘I have cleaned the air filter’. 

Step 5/6: Your filter status has now begun a new cycle.

Step 4D: Adding Siri Shortcuts to Cielo Home

Step 1: On the Home screen, tap on the Air-Conditioner / Heat Pump you want to add Siri Shortcuts for.

Step 2: Tap on ‘eSaver’ in the navigation bar.

Step 3: Tap on ‘Siri Shortcuts’.

Step 4: Tap on 'Create Shortcut' to make a new Siri Shortcut.

Step 5: Enter the desired AC settings when the command is sent through Siri Shortcuts. You can set the                 AC operating mode, temperature set point, and fan speed. Tap on ‘Done’. 

Step 6: Next enter the phrase you want the Shortcut to be activated on. In this example 'Cool The Room'.              Tap on 'Add to Siri'. 

Step 7: All your currently active Siri Shortcuts will now be displayed. In this example, when you say to Siri              'Cool The Room', the AC will turn on at 73 degrees in cool mode at high fan speed.

 

Step 4E: Change Appliance (Manufacturer/Model Number)
                - iOS users

Step 1: On the Home screen, tap on the Breez device you want to change the appliance for.

Step 2: Tap on the ‘Settings’ icon on the top right.

Step 3: Tap on ‘Change Appliance’.

Step 4: Tap on the 'Manufacturer' and select the appropriate AC manufacturer from the drop down list.

Step 5: Tap on 'Remote Model' and select your remote model from the drop down list. In this case 'Model              11 (Fahrenheit)'.

Step 6: Tap on 'Confirm' once you have selected the correct AC manufacturer and remote model.

Step 7: Once selected, send a test On/Off command to your AC. Once the AC accepts the command, tap               on 'Done'.

Step 4F: Changing Device Name (e.g. bedroom, lounge etc.)
                - iOS users

Step 1: On the Home screen, tap on the Air-Conditioner / Heat Pump you want to change the name of.

Step 2: Tap on the ‘Settings’ icon on the top right.

Step 3: Tap on ‘Device Preferences’.

Step 4: Tap on ‘Device Name’.

Step 5: Select the new name from a list of common names, or type a custom name.

Step 6: Type the new name of the device, and tap on 'Done'. Device name is now changed.

Step 4G: Switch temperature units between Centigrade and Fahrenheit - iOS users

Step 1: On the Home screen, tap on the Air-Conditioner / Heat Pump you want to change the units of.

Step 2: Tap on the ‘Settings’ icon on the top right.

Step 3: Tap on ‘Device Preferences’.

Step 4: Tap on the C to F toggle against 'Temperature Unit'.

Step 5: Your device's temperature units are changed successfully from Fahrenheit to Celsius.

 

Step 4H: Changing touch settings and sensitivity on your (Cielo Breez) Device
                - iOS users

Step 1: On the Home screen, tap on the Breez device you want lock/unlock, or change the sensitivity                      of.

Step 2: Tap on the ‘Settings’ icon on the top right.

Step 3: Tap on ‘Device Preferences’.

Step 4: Tap on 'Touch'.

Step 5: You can now enable or disable the device power touch control.

Step 6: You can also change the sensitivity of the touch buttons.

Step 4I: Cielo Breez Device Display Settings - iOS users

1. Changing Display Picture on the Device

Step 1: On the Home screen, tap on the Air-Conditioner / Heat Pump you want to change the picture of.

Step 2: Tap on the ‘Settings’ icon on the top right.

Step 3: Tap on ‘Device Preferences’.

Step 4: Tap on 'Change Picture'.

Step 5: Tap on 'Personalized Picture'.

Step 6: Tap on the device picture.

Step 7: Take a photo or choose from gallery. You may be asked for permission to access your phone’s                    photos & camera. After taking a photo, tap on ‘Check’ on the bottom of the screen to upload or                select from gallery for auto upload.

Note: You can change the Device Image to Default anytime by selecting ‘Default Image’.

2. Switching Device (Cielo Breez) Display Screen ON/OFF

Step 1: On the Home screen, tap on the Breez device you want to change the LED brightness of.

Step 2: Tap on the ‘Settings’ icon on the top right.

Step 3: Tap on ‘Device Preferences’.

Step 4: In Device preferences, tap on 'Display'.

Step 5/6: Toggle the 'Screen Display' to switch the screen on or off.

3. Adjusting the brightness of Device (Cielo Breez) Screen

Step 1: On the Home screen, tap on the Breez device you want to change the LED brightness of.

Step 2: Tap on the ‘Settings’ icon on the top right.

Step 3: Tap on ‘Device Preferences’.

Step 4: In Device preferences, tap on 'Display'.

Step 5/6: Toggle the 'Brightness' slider to change the brightness of the Breez device power button.

Step 4J: Changing Wi-Fi - iOS users

Step 1: On the Home screen, tap on the Breez device you want to change the Wi-Fi of.

Step 2: Tap on the ‘Settings’ icon on the top right.

Step 3: Tap on ‘Device Wi-Fi’.

Step 4: Tap on 'Change Wi-Fi'.

Step 5: Tap on the intended Wi-Fi network.

Step 6: Enter the password of the Wi-Fi network. Tap on 'Connect'.

Step 7: The device Wi-Fi is now changed.

Step 4K: Sync AC State (e.g. AC is ON and App is showing it as
              OFF) - iOS users

Step 1: On the Home screen, tap on the Breez device you want to sync with your AC.

Step 2: Tap on the ‘Settings’ icon on the top right.

Step 3: Tap on ‘Sync AC State’.

Step 4: From the drop down menus, select the AC parameters which you want on your Breez device.              Then tap on 'Sync'. The Breez device will now display these selected parameter values.

Step 4L: Zone Settings of your connected Air Conditioners
              - iOS users

1. Creating a zone

A zone will allow you to control power and other settings of all your registered devices together with a simple tap. To create a Zone in app, follow these steps:

Step 1: On the Home screen, tap on the Breez device you want to move to a zone.

Step 2: Tap on the ‘Settings’ icon on the top right.

Step 3: Tap on ‘Device Preferences’.

Step 4: Tap on ‘Move to Zone’.

Step 5:  At the moment there is no zone available. Tap on ‘Create Zone’ to create a zone.

Step 6/7: Give your zone a name (e.g. Ground floor, First floor, Basement, etc.) and choose an icon.

Step 8:   Zone is created successfully. 

2. Adding a Device to a zone

Step 1: On the Home screen, tap on the Breez device you want to move to a zone.

Step 2: Tap on the ‘Settings’ icon on the top right.

Step 3: Tap on ‘Device Preferences’.

Step 4: Tap on ‘Move to Zone’.

Step 5: On the Zones Home screen, you will see a list of all active zones. Tap on the zone you wish to                     move the device to.

Step 6: You will see a check mark next to the zone name.

Step 7: Tap on ‘Done’.

Step 8: Device is added to zone successfully.

3. Removing a Device from a zone

Step 1: On the device control screen, tap on the ‘Settings’ icon on the top right.

Step 2: Tap on ‘Device Preferences’.

Step 3: Tap on ‘Remove from Zone’. 

Step 4: Device removed from zone successfully.

4. Editing a zone

Step 1: Tap on ‘Settings’ icon of the zone you wish to edit.

Step 2: In zone settings, tap on ‘Edit Zone’. You can change the icon and name of the zone as 
            you desire.

Step 3: Tap on 'Done'.

5. Deleting a zone

Note: To delete a zone, you have to remove all the devices added in a zone individually. You may not be allowed to delete a zone otherwise. To delete a device from a zone, refer to Section 3.

Step 1: Tap on ‘Settings’ icon of the zone you wish to delete.

Step 2: In zone settings, tap on ‘Delete Zone’. Zone is successfully deleted.

Step 4M: Deleting your Device (Cielo Breez) - iOS users

Step 1: On the Home screen, tap on the Breez device you want to remove.

Step 2: Tap on the ‘Settings’ icon on the top right.

Step 3: Tap on ‘Remove Device’.

Step 4: Tap on 'Remove' on the pop up. Your device is now removed.

Step 5A: Setting up schedules for your heating and cooling
               - Android users

1. Setting up a schedule

You can schedule your Air-Conditioner / Heat Pump connected to Breez by performing following steps on your Cielo Home app:

Step 1: On the Home screen, tap on the Air-Conditioner / Heat Pump you want to schedule.

Step 2: Tap on ‘Schedule’ in the navigation bar.

Step 3: Tap on the '+' icon as shown.

Step 4: You can turn the Air-Conditioner / Heat Pump ON/OFF via schedule, select the time,
            mode, temperature and fan speed of your choice. Select power ON/OFF and select the 
            day/days you want to set the schedule for. You may also choose the schedule name of 
            your choice. Tap 'Done' to set-up the schedule.

Step 5: Once the schedule is set, it will appear on the schedule tab. You can turn it On/Off by toggling the              slider against the schedule. 

2. Deleting/Editing a schedule

Step 1: From the device control screen, tap on ‘Schedule’ in the navigation bar.

Step 2: In the 'Schedule' tab, you will see all your set schedules.

Step 3: To edit a schedule, tap on the schedule you want to edit. To delete a schedule, swipe left on the                  schedule you want to delete until the green tab appears. Continue swiping until the left edge of                the screen to delete schedule.

Step 5B: Enabling Location Control (Turn your AC on before you
               arrive and turn it off after you have left the pre-set
               location) - Android users

You can configure location based control for your Air-Conditioner / Heat Pump by performing these steps via Cielo Home app:

Step 1: On the Home screen, tap on the Air-Conditioner / Heat Pump you want to control
             through location controls.

Step 2: Tap on ‘eSaver’ in the navigation bar.

Step 3: Tap on ‘Geofencing’.

Step 4: Toggle the slider to enable Location Control, as shown in the red box. 

Step 5: You will see your current location on the map. Set a Geo-Fence range for your Air-Conditioner/                  Heat Pump between 1-10 Miles using the slider. Entering or exiting this range
            will trigger the Air-Conditioner / Heat Pump ON/ OFF. Tap on 'Next'.

Step 6: Select your desired AC settings to be performed when you enter or exit the pre-set
            location and tap on ‘Save’. Once locations controls are triggered you will get a notification
            in your app timeline.

Step 5C: Checking your AC’s Air Filter Status - Android users

You can check the live air filter status of your Air-Conditioner / Heat Pump. Simply, follow the steps listed below:

Step 1: On the Home screen, tap on the Air-Conditioner / Heat Pump you want to check the 
            air filter status for.

Step 2: Tap on ‘eSaver’ in the navigation bar.

Step 3: Tap on ‘AC Filter’.

Step 4: You will see your current air filter status of the AC being used with the Device since registration                  (or since the last cleaning). When the range is about to fill up, manually remove the AC’s air filter                and clean it. Once done place filter back into the AC. Tap on ‘I have cleaned the air filter’. 

Step 5/6: Tap on ‘Reset’. Your filter status has now begun a new cycle.

Step 5D: Change Appliance (Manufacturer/Model Number)
               - Android users

Step 1: On the Home screen, tap on the Breez device you want to change the appliance for.

Step 2: Tap on the ‘Settings’ icon on the top right.

Step 3: Tap on ‘Change Appliance’.

Step 4: Tap on the 'Manufacturer' and select the appropriate AC manufacturer from the drop down list.                  Tap on 'Remote Model' and select your remote model from the drop down list. In this case                          'Model 1'. Tap on 'Confirm' once you have selected the correct AC manufacturer and remote                       model.

Step 8: Once selected, send a test On/Off command to your AC. Once the AC accepts the command, tap                on 'Done'.

Step 5E: Changing Device Name (e.g. bedroom, lounge etc.)
                - Android users

Step 1: On the Home screen, tap on the Air-Conditioner / Heat Pump you want to change the name of.

Step 2: Tap on the ‘Settings’ icon on the top right.

Step 3: Tap on ‘Device Preferences’.

Step 4: Tap on ‘Device Name’.

Step 5: Select the new name from a list of common names, or type a custom name.

Step 6: Type the new name of the device, and tap on 'Done'. Device name is now changed.

 

Step 4F: Switch temperature units between Centigrade and Fahrenheit - Android                  users

Step 1: On the Home screen, tap on the Air-Conditioner / Heat Pump you want to change the units of.

Step 2: Tap on the ‘Settings’ icon on the top right.

Step 3: Tap on ‘Device Preferences’.

Step 4: Tap on the C to F toggle against 'Temperature Unit'.

Step 5: Your device's temperature units are changed successfully from Fahrenheit to Celsius.

Step 5G: Changing touch settings and sensitivity on your (Cielo Breez) Device
                - Android users

Step 1: On the Home screen, tap on the Breez device you want lock/unlock, or change the sensitivity                      of.

Step 2: Tap on the ‘Settings’ icon on the top right.

Step 3: Tap on ‘Device Preferences’.

Step 4: Tap on 'Touch'.

Step 5: You can now enable or disable the device power touch control.

Step 6: You can also change the sensitivity of the touch buttons.

 

Step 5H: Cielo Breez Device Display Settings - Android users

1. Changing Display Picture on the Device

Step 1: On the Home screen, tap on the Air-Conditioner / Heat Pump you want to change the picture of.

Step 2: Tap on the ‘Settings’ icon on the top right.

Step 3: Tap on ‘Device Preferences’.

Step 4: Tap on 'Change Picture'.

Step 5: Tap on 'Personalized Picture'.

Step 6: Tap on the device picture.

Step 7: Take a photo or choose from gallery. You may be asked for permission to access your
            phone’s photos & camera. After taking a photo, tap on ‘Check’ on the bottom of the screen to                    upload or select from gallery for auto upload.

Note: You can change the Device Image to Default anytime by selecting ‘Default Image’.

2. Switching Device (Cielo Breez) Display Screen ON/OFF

Step 1: On the Home screen, tap on the Breez device you want to change the LED brightness of.

Step 2: Tap on the ‘Settings’ icon on the top right.

Step 3: Tap on ‘Device Preferences’.

Step 4: In Device preferences, tap on 'Display'.

Step 5/6: Toggle the 'Screen Display' to switch the screen on or off.

3. Adjusting the brightness of Device (Cielo Breez) Screen

Step 1: On the Home screen, tap on the Breez device you want to change the LED brightness of.

Step 2: Tap on the ‘Settings’ icon on the top right.

Step 3: Tap on ‘Device Preferences’.

Step 4: In Device preferences, tap on 'Display'.

Step 5/6: Toggle the 'Brightness' slider to change the brightness of the Breez device power button.

Step 5I: Changing Wi-Fi - Android users

Step 1: On the Home screen, tap on the Breez device you want to change the Wi-Fi of.

Step 2: Tap on the ‘Settings’ icon on the top right.

Step 3: Tap on ‘Device Wi-Fi’.

Step 4: Tap on 'Change Wi-Fi'.

Step 5: Tap on the intended Wi-Fi network.

Step 6: Enter the password of the Wi-Fi network. Tap on 'Connect'.

Step 7: The device Wi-Fi is now changed.

Step 5J: Sync AC State (e.g. AC is ON and App is showing it as
              OFF) - Android users

Step 1: On the Home screen, tap on the Breez device you want to sync with your AC.

Step 2: Tap on the ‘Settings’ icon on the top right.

Step 3: Tap on ‘Sync AC State’.

Step 4: From the drop down menus, select the AC parameters which you want on your Breez device.                Then tap on 'Sync'. 

 

Step 5K: Zone Settings of your connected Air Conditioners
               – Android users

1. Creating a zone

A zone will allow you to control power and other settings of all your registered devices together with a simple tap. To create a Zone in app, follow these steps:

Step 1: On the Home screen, tap on the Breez device you want to move to a zone.

Step 2: Tap on the ‘Settings’ icon on the top right.

Step 3: Tap on ‘Device Preferences’.

Step 4: Tap on ‘Move to Zone’.

Step 5:  At the moment there is no zone available. Tap on ‘Create Zone’ to create a zone.

Step 6/7: Give your zone a name (e.g. Ground floor, First floor, Basement, etc.) and choose an icon.

Step 8:   Zone is created successfully. 

2. Adding a Device to a zone

Step 1: On the Home screen, tap on the Breez device you want to move to a zone.

Step 2: Tap on the ‘Settings’ icon on the top right.

Step 3: Tap on ‘Device Preferences’.

Step 4: Tap on ‘Move to Zone’.

Step 5: On the Zones Home screen, you will see a list of all active zones. Tap on the zone you wish to                     move the device to.

Step 6: You will see a check mark next to the zone name.

Step 7: Tap on ‘Done’.

Step 8: Device is added to zone successfully.

3. Removing a Device from a zone

Step 1: On the device control screen, tap on the ‘Settings’ icon on the top right.

Step 2: Tap on ‘Device Preferences’.

Step 3: Tap on ‘Remove from Zone’. 

Step 4: Device removed from zone successfully.

4. Editing a zone

Step 1: Tap on ‘Settings’ icon of the zone you wish to edit.

Step 2: In zone settings, tap on ‘Edit Zone’. You can change the icon and name of the zone as 
            you desire.

Step 3: Tap on 'Done'.

5. Deleting a zone

Note: To delete a zone, you have to remove all the devices added in a zone individually. You may not be allowed to delete a zone otherwise. To delete a device from a zone, refer to Section 3.

Step 1: Tap on ‘Settings’ icon of the zone you wish to delete.

Step 2: In zone settings, tap on ‘Delete Zone’. 

Step 3: Tap on 'Remove' on the pop up. Zone is successfully deleted.

Step 5L: Deleting your Device (Cielo Breez) - Android users

Step 1: On the Home screen, tap on the Breez device you want to remove.

Step 2: Tap on the ‘Settings’ icon on the top right.

Step 3: Tap on ‘Remove Device’.

Step 4: Tap on 'Remove' on the pop up. Your device is now removed.