Temperature calibration is the process of adjusting the temperature readings on your Cielo Breez Edge to match the ambient room temperature. This helps ensure the device shows accurate temperature readings.
Why Temperature Readings May Differ
- Installing Breez Edge near a drafty window or in direct sunlight can cause inaccurate readings.
- Heat from nearby electronics, such as lamps or computers, can raise the surrounding temperature, resulting in elevated readings on the device.
How to Check If Your Device Needs Calibration
Checking whether your Breez Edge needs calibration involves comparing its reading with your actual room temperature.
- Take a thermometer and place it near your Breez Edge at a similar height.
- Wait 15 minutes and then record the readings on both your thermometer and your Breez Edge. Calculate the difference between the two. A difference of one to three degrees is acceptable, but if it’s more than that, your Breez Edge needs to be calibrated. For instance, if the thermometer shows room temperature as 73°F and Breez Edge shows 78°F, then there is a 5-degree difference that needs to be adjusted.
Calibrating Temperature Using the Device
Step 1: Go to 'Menu' and select 'Calibration’.
Step 2: Use the up/down arrows to calibrate the temperature as required.
Calibrating Temperature Using the Cielo Home app
Step 1: On the Home screen, tap 'More' to access additional settings.
Step 2: Tap on the ‘Settings’ icon at the top right corner.
Step 3: Tap on 'Calibration'.
Step 4: Calibrate the temperature by tapping - or + according to your requirements.
💡Helpful Information
In Fahrenheit, you can calibrate temperature by up to ±8°F in either direction at a time. To calibrate further, first save your initial calibration, then you can adjust an additional ±7°F.
In Celsius, you can calibrate temperature by up to ±5°C in either direction at a time. To calibrate further, first save your initial calibration, then you can adjust an additional ±4°C.
Step 5: Tap on ‘Apply’.
[[related:28732112309655]]