A zone will allow you to control power of all your registered devices together with a simple tap.
1. Creating a zone
A zone will allow you to control power and other settings of all your registered devices together with a simple tap. To create a Zone in app, follow these steps:
Step 1: On the Home screen, tap on the Breez device you want to move to a zone.
Step 2: Tap on the ‘Settings’ icon on the top right.
Step 3: Tap on ‘Device Preferences’.
Step 4: Tap on ‘Move to Zone’.
Step 5: At the moment there is no zone available. Tap on ‘Create Zone’ to create a zone.
Step 6/7: Give your zone a name (e.g. Ground floor, First floor, Basement, etc.) and choose an icon.
Step 8: Zone is created successfully.
2. Adding a Device to a zone
Step 1: On the Home screen, tap on the Breez device you want to move to a zone.
Step 2: Tap on the ‘Settings’ icon on the top right.
Step 3: Tap on ‘Device Preferences’.
Step 4: Tap on ‘Move to Zone’.
Step 5: On the Zones Home screen, you will see a list of all active zones. Tap on the zone you wish to move the device to.
Step 6: You will see a check mark next to the zone name.
Step 7: Tap on ‘Done’.
Step 8: Device is added to zone successfully.
3. Removing a Device from a zone
Step 1: On the device control screen, tap on the ‘Settings’ icon on the top right.
Step 2: Tap on ‘Device Preferences’.
Step 3: Tap on ‘Remove from Zone’.
Step 4: Device removed from zone successfully.
4. Editing a zone
Step 1: Tap on ‘Settings’ icon of the zone you wish to edit.
Step 2: In zone settings, tap on ‘Edit Zone’. You can change the icon and name of the zone as
you desire.
Step 3: Tap on 'Done'.
5. Deleting a zone
Note: To delete a zone, you have to remove all the devices added in a zone individually. You may not be allowed to delete a zone otherwise. To delete a device from a zone, refer to Section 3.
Step 1: Tap on ‘Settings’ icon of the zone you wish to delete.
Step 2: In zone settings, tap on ‘Delete Zone’. Zone is successfully deleted.
