Comfy Max transforms your Cielo Breez Max into a true smart thermostat for your mini-split. It goes beyond basic control by enabling your mini-split to operate in a highly configurable, intelligent mode. Comfy Max helps you achieve your desired home climate while preventing overheating or overcooling.
How Comfy Max Works
You just have to define your preferred temperature once, and Breez Max handles the rest.
Comfy Max utilizes an AI-based intelligent algorithm to adjust the setpoints, fan speed, and mode of the mini-split to maintain your predefined room temperature, preventing overheating or overcooling.
Let’s say your comfort settings are:
🔥 Heating: 70°F
❄️ Cooling: 75°F
Scenario: Room temperature drops to 69°F
Since the room temperature is below your preferred heating setpoint, Comfy Max kicks in and tells your mini-split to start heating. The system might set a temporary heating setpoint slightly above 70°F, depending on:
- Current indoor temperature
- Outdoor conditions
- Estimated time to reach your comfort level
This smart adjustment helps reach your preferred temperature efficiently.
Your Breez Max will continue to monitor the room temperature with its built-in sensors, and as soon as it reaches 70°F, it will signal your mini-split to lower the setpoint to a value below your current room temperature. The new setpoint will ensure that your mini-split compressor runs on minimal power to maintain the desired room temperature.
Comfy Max uses dynamic temperature adjustments to achieve and maintain your preferred comfort levels, preventing overheating and overcooling.
Helpful Insight
When using Comfy Max, the usage history displayed in the Cielo Home app only reflects the time your unit is actively heating or cooling. It does not include periods when the unit is powered on but in an idle state (neither heating nor cooling), which means the compressor is not running because the desired temperature has already been achieved.
For instance, if your mini-split stays on for 5 hours but only actively cools for 3 hours to maintain your preferred temperature, the usage history will show 3 hours, not 5. The remaining 2 hours, when the system was on but not actively cooling, will not be counted.
Setting Up Comfy Max
You can set up Comfy Max for your mini-split by performing these steps via the Cielo Home app:
Step 1: On the Home screen, tap 'More' to access additional settings.
Step 2: Tap on ‘eSaver’ in the navigation bar.
Step 3: Tap on 'Comfy Max'.
Step 4: Tap on ‘Add Template’ to set up Comfy Max.
Step 5: Choose your preferred temperature, and select whether you want the fan to run after your desired cooling temperature has been reached. Add a name for this template and tap on ‘Done’.
Step 6: Your Comfy Max settings are now saved. You can turn Comfy Max 'On' from the toggle next to the name of the Comfy Max template.
Scheduling Comfy Max
To schedule Comfy Max, you need to save at least one template setting for Comfy Max in the app (as explained in the previous section). After you have done that, follow the steps below to schedule your Comfy Max.
Step 1: On the Home screen, tap on the mini-split you want to schedule.
Step 2: Tap on ‘Schedule’ in the navigation bar.
Step 3:Tap on ‘+ Add Schedule’.
Step 4: Select ‘Comfy Max Schedule’.
Step 5: Select the time and day(s) and choose whether you want to set it as a repeat schedule. Then, select your desired Comfy Max template.
Once the Comfy Max schedule is set, it will appear on the schedules tab. You can enable/disable it by toggling the slider against the schedule.
[[related:15545206841239,16101945796759]]